Draw-Tite Class III/IV Hitch (Part Number:75806)
Class III/IV hitches are Weight Carrying (WC) and also are Weight Distributing (WD) hitches depending on the vehicle and hitch specifications. Not all Class III/IV hitches are rated to be both. The hitch specifications box below will alert you to a hitch that is not rated for weight distributing use.
Class III/IV hitches used as Weight Carrying are rated up to 6,000 lbs. Gross Trailer Weight (GTW) with a maximum trailer Tongue Weight (TW) of 900 lbs. The use of a ball mount and hitch ball of the same rating or higher is required. To use the weight distribution side of the hitch, a weight distribution system is required. Class III/IV hitches attach to the vehicle frame only. Always consult your owner's manual for vehicle rating.
Help determining Gross Trailer Weight & Tongue Weight
|Hitch Class||Class III/IV|
|Receiver Size||2 inch|
|Installation Instructions||CLICK HERE|
Over fifty years and millions of trailer hitches later, our 500 dedicated employees put the same care and patience into every hitch we build today as Bill Whichello did fifty years ago. We also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles.
The basis of our continued success is that our trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.
Our trailer hitches are covered by a Nationwide/lifetime limited warranty. We have over 10,000 dealers throughout North America. So wherever you live or travel, there is always a knowledgeable and helpful Draw-Tite dealer nearby. This is especially important when you consider nearly 100% of our consumers use their trailer hitch to tow outside of their local area.
The above information has been provided by the Manufacturer, and we cannot guarantee the accuracy thereof or endorse the opinions expressed.
(Your cart is empty)