View Larger Image
Draw-Tite Class III Hitch (Part Number:75531)
| Your Price: | $183.95 |
| List Price: | |
| You Save: | 38% ($110.37) |
Availability: 98% of orders ship within 24 hrs
Shipping: Calculate Shipping Cost
Your Name:
Your Email Address:
Email To:
Short Message:
(NOTE: Image may differ from actual hitch. Refer to instructions for actual image.)
Class III/IV hitches are Weight Carrying (WC) and also are Weight Distributing (WD) hitches depending on the vehicle and hitch specifications. Not all Class III/IV hitches are rated to be both. The hitch specifications will alert you to a hitch that is not weight distributing. Class III/IV hitches used as Weight Carrying is rated up to 6,000 lbs. Gross Trailer Weight (GTW) with a maximum trailer Tongue Weight (TW) of 600 lbs. The use of a ball mount and hitch ball of the same rating or higher is required. To use the weight distribution side of the hitch a weight distribution system is required. Class III/IV hitches attach to the vehicle frame only. Always consult your owner's manual for vehicle rating.
Help determining Gross Trailer Weight & Tongue Weight
| Hitch Class | Class III |
| GTW | 4000 lbs |
| TW | 400 lbs |
| WDGTW | 4000 lbs |
| WDTW | 400 lbs |
| Receiver Size | 2 inch |
Over fifty years and millions of trailer hitches later, our 500 dedicated employees put the same care and patience into every hitch we build today as Bill Whichello did fifty years ago. We also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles.
The basis of our continued success is that our trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.
Our trailer hitches are covered by a Nationwide/lifetime limited warranty. We have over 10,000 dealers throughout North America. So wherever you live or travel, there is always a knowledgeable and helpful Draw-Tite dealer nearby. This is especially important when you consider nearly 100% of our consumers use their trailer hitch to tow outside of their local area.
The above information has been provided by the Manufacturer, and we cannot guarantee the accuracy thereof or endorse the opinions expressed.
| 2007 | Mazda | CX-9 | |
| 2008 | Mazda | CX-9 |
![]() |
Hitchhide Hitch Ball Accessory | Part Number: HH100 |
| The Hitchhide drawbar tote bag was created specifically for those people who want a durable and easy way to store their bag. The Hitchhide is made of extremely rugged material. | ||
| Your Price: $25.95 | ||
More Information | ||
![]() |
Draw-Tite Zinc Hitch Ball | Ball Diameter: 2 inch" |
| Part Number: 63827 | GTW: 6,000 | |
| Your Price: $10.95 | Shank Diameter: 1 inch" | |
| Shank Length: 2 1/8 inch" | ||
More Information | ||
![]() |
Draw-Tite Zinc Hitch Ball | Ball Diameter: 2 5/16 inch" |
| Part Number: 63833 | GTW: 6,000 | |
| Your Price: $10.95 | Shank Diameter: 1 inch" | |
| Shank Length: 2 1/8 inch" | ||
More Information | ||
![]() |
Draw-Tite Zinc Hitch Ball | Ball Diameter: 1 7/8 inch" |
| Part Number: 63817 | GTW: 2,000 | |
| Your Price: $10.95 | Shank Diameter: 1 inch" | |
| Shank Length: 2 1/8 inch" | ||
More Information | ||
![]() |
Class III, IV Ball Mount Kit with Pin and Clip | Ball Hole Size: 1 inch |
| Part Number: 2953 | GTW/TW: | |
| Rise: 2 3/4 inch | Drop: 4 inch | |
| Length: 9 inch | Shank Size: 2 inch | |
| Your Price: $12.95 | ||
More Information | ||
![]() |
Class III, IV Ball Mount Kit with Pin and Clip | Ball Hole Size: 1 inch |
| Part Number: 2923 | GTW/TW: | |
| Rise: 3/4 inch | Drop: 2 inch | |
| Length: 8.5 inch | Shank Size: 2 inch | |
| Your Price: $8.95 | ||
More Information | ||
![]() |
Pin and Clip - Class III and IV | Part Number: 63240 |
| Standard pin and clip to attach a ball mount into a 2 receiver. | ||
| Your Price: $6.95 | ||
More Information | ||
![]() |
Curt Electrical | Part Number: CT56016 |
| T-One connectors require no splicing of wires. Simply locate your vehicle's wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle's harness. No special tools required. Many units now include circuit protection for your safety. | ||
| Your Price: $59.95 | ||
More Information | ||
![]() |
Valley Electrical | Part Number: VI30170 |
| Today's vehicles contain more complex wiring systems than ever before. Easy plug-in T-One Connectors take the guesswork out of tow vehicle wiring by plugging easily into the vehicle's factory wiring harness. Having a T-One Connector for your wiring solutions is the best way to travel! | ||
| Your Price: $58.95 | ||
More Information | ||
Andersen 10 inch Rapid Hitch Adjustable Ball Mount Kit
$279.95
MSRP: $378.12
Save $98.17!
98% Of All Orders Ship Within 24 Hours!
Call toll-free 866.308.9054 for expert advice on everything we offer.
Phone Sales: Orders taken 24 hours a day. Everyday.