Keeper (Part Number:KTA-15120)
|You Save:||27% ($6.36)|
Designed for winches with a rated line pull up to 4,000 lbs. The Keeper pulley block is specifically designed for maximizing the pulling power of a winch. This 8,000 lb pulley block allows the winch to effectively use the power of the "double line pull". The hook on the pulley block is removed and the winch cable line is run over the pulley. The pulley block hook is then replaced and then attached to a strap wrapped on the forward fixed-object. The hook on the winch cable end is attached to the front of the vehicle being pulled, or to a fixed object close to the front of the vehicle.
For 28 years, Keeper has stretched the limits of our category, continually met the demands of a changing market place, improved cargo handling and helped mold the way the world transports cargo.
Keeper developed its Hi-Test™ webbing many years ago using 3 layers of high tenacity yarn to protect and provide strength. The face, back and edge layers provide the webbing with abrasion and weather protection and the center, or warp yarns, provide the strength. All Hi-Test webbing is tested for abrasion resistance using Federal Test Method #5309, required of all mil-spec webbing. The webbing is cycled over a steel hexagonal bar to simulate real life application. A tensile test is then conducted. All Keeper webbing passes an abrasion capacity requirement so you are assured of a long lasting product.
The above information has been provided by the Manufacturer, and we cannot guarantee the accuracy thereof or endorse the opinions expressed.
(Your cart is empty)